Transfer 8P
- 8 holding clamps
- 6 end forming tools
- Tube cutting operation in the machine
- Automatic loading
- electro-hydraulics
- Loading with pre-cut tubes
Technical specifications
- Hydraulic and pneumatic Pushing power: 4000kg
- Clamping forces: 4000kg
- Operating pressure: 100 bar
- Power consumption: 50 kw
- Working tube Ø: 8 to 20 mm diameter
- Working length: from 80 to 2000 mm
- Cycle time: 8 to 14 seconds
- Loading system: automatic
- Compatible tubes: straight, bent, coils or bars
- Maximum number of tools: up to 6
What can you do with a TRANSFER 8P?
The TRANSFER 8P end forming machine allows up to 8 operations, also loading pre-cut tubes.
HIGH PRODUCTION WITHOUT CHIPS REMOVAL
The TRANSFER 8P has been designed for end forming works without chip removal, for high productivity cycles.
It is equipped with 8 rotating clamps and is able to perform till 6 end forming operations in sequence. The tools and clamp are equipped with a fast connection coupling, which allows machine set-up in a short time.
Which operations can you perform with a Transfer 8P?
Up to 6 end forming operations can be performed on the tube without chips removal
- Deformation
- Cutting
- Rolling
- Threading
It is possible to apply loading units, but also to load parts such as flange, sockets, shells, inserts and similar.
